The Surface Wizard places great importance on the safety and well-being of all.
This is why it is crucial to read this section carefully to ensure optimal handling and use of the products.
Wearing protective equipment (at all times): Before using The Surface Wizard panels, be sure to wear appropriate protective equipment, such as safety glasses, cut-resistant gloves and an N95 type respirator mask to protect you from dust generated during cutting and installation.
Preparing the Support Surface: Before installing the panels, prepare the support surface by ensuring that it is flat, clean, dry and dusted. This will ensure better adhesive adhesion and secure installation.
Adequate ventilation: When cutting panels, perform the operation in a well-ventilated area to avoid dust accumulation. Use protective equipment and be sure to maintain adequate air circulation.
Careful handling: Handle panels with care to avoid risk of injury. Avoid excessive pressure on the panels to avoid damaging them during installation.
Use of appropriate equipment: When cutting panels, use appropriate tools such as a wet saw, angle grinder or circular saw with a diamond blade. Follow the manufacturer's recommendations for safe use of these tools.
Cleaning: After installation and cutting, clean the area thoroughly to remove any dust or debris. Use a vacuum cleaner equipped with a HEPA filter to capture fine dust particles.
Waste Disposal: Properly dispose of waste generated during panel cutting and installation. Follow local regulations regarding the disposal of building materials.
Skin or Eye Contact: In case of skin contact, immediately wash the affected area with soap and water. In case of contact with eyes, rinse with plenty of water for at least 15 minutes and consult a healthcare professional .
Dust inhalation: If you inhale dust, move to a well-ventilated area and breathe fresh air. If symptoms persist, consult a healthcare professional .
Cuts or Injuries: If cuts or injuries occur during handling or cutting, clean the wound and apply a clean dressing. If the injury is serious, seek medical attention immediately .
Allergic reaction: If you experience an allergic reaction such as itching, redness, or rash, stop exposure immediately and consult a healthcare professional .
By following these precautions before, during and after installing and cutting Silex Element panels, you help ensure your safety and well-being throughout the process. If you have any doubts, concerns, or if a problem persists, do not hesitate to consult a healthcare professional .
At all times, keep out of reach of children!