Finishing Mortar - Sleek Concrete TSW
Silex Element offers mortars with a shade associated with the panel colors of Peau de béton | raw finish panels and LightConcrete.
Features
The finishing mortar - Sleek Concrete s a pre-mixed and pre-colored powder, ideal for:
- Remedying imperfections resulting from cutting.;
- Seamlessly joining panels*.
Please note that The Surface Wizard does not necessarily recommend panel joints. If you choose not to create them, we advise painting the wall with a color closely matching the panels for a uniform finish.
*Panel joints may be considered for a more aesthetically pleasing finish, depending on individual preferences and project design."
1 kg (2.20 lb) couvers ± 40 sq. ft.
IMPLEMENTATION
The support must be clean, free of grease and non-adherent areas. It must be moistened without being dripping.
Mortar:
1 kg of FINISHING MORTAR + 0.12 liters of water.
3.75 kg of FINISHING MORTAR + 0.45 liters of water.
In a clean trough, first pour the clear water then gradually add the mortar according to the quantities indicated. Mix manually with a trowel or using an electric mixer until you obtain a homogeneous paste without lumps.
Mixture usage time: 1h30.
Application: In finishing coating, each section of wall must be finished within the day. The restarts must be located at natural stops (corners, doors, etc.).
In the case of large thicknesses to be covered (+ 2 cm), work in several layers.
Complete drying: approximately 24 hours per 2 cm layer.
Application temperatures between +5°C and +30°C.
Do not use this product on a plaster-based surface.
Do not carry out work in the rain or in direct sunlight.
CLEANING
Clean tools with water.
CONSERVATION
12 months in its original closed packaging and stored dry.