Scellant TSW
TSW sealant is an effective solution to protect and preserve your surface, while improving their durability and resistance.
Features
For Panels
All panels are pre-sealed during their manufacturing process to ensure their quality and durability.
If you plan to install them in a humid environment or one prone to splashes, it is highly recommended to apply an additional layer of sealant, followed by two coats of varnish for optimal protection.
On panels, the sealant is used to provide protection against contact with liquids and other substances (water, oil, etc.).
For the Micro-concrete
After applying the layers of Micro-concrete, sanding, dusting, wet sweeping, and allowing the surface to dry completely, additional protection against water, oil, and other liquids is provided..
TSW already includes a sealant in its Micro-concrete kits, but if you wish to enhance the protection of your surface, you can add another layer of sealant.
Specifications
Cleaning | Water |
Drying | ± 4h |
COV | 3 gr/liter |
| Storage and Preservation | 6 months in its original unopened packaging, stored in a temperate location, protected from freezing. |
Coverage capacity
Quantity | 175 ml | 375 ml | 750 ml |
Covered area | ± 55 sq.ft. | ± 120 sq.ft. | ± 240 sq.ft. |
Application Steps
Wear protective equipment
For your safety, it is advisable to wear gloves, a mask and glasses.
After protecting what should not be sealed,
Begin with the corners and edges using a brush
Then continue with an applicator pad (it avoids roller marks) then even out the layer with a foam lacquer roller
Ensure there is no excess and allow it to penetrate well into the pores of the surface
